Powder Ball Press Machines Have Good Performance

The quicklime dry powder ball press machine is a new device improved on other ball press machines. It is made of abrasion-resisting alloy, so it has strong abrasive resistance and a long service life.

In the metallurgy industry, most lime powder materials are thrown away or come into other use, which leads to serious resource waste. Because of the lacking of resources, the metallurgy industry pays more and more attention to the usage of the lime powder materials. At this time, our quicklime dry powder ball press machine shows its good performance.

The workflow of the ball press machine is as follows: the drawing lime gets screened and the powder materials with size smaller than 3mm enter the quicklime dry powder ball press machine for processing. They come out with the standard size of 35mm*25mm*15mm or with a specified size according to customers’ needs. Then the qualified ball blocks enter the finished product warehouse for the later smelting.

A mineral powder ball press machine is widely used to compact powder materials as well as dry wet fine concentrate powder in the mineral beneficiation. It also works as an auxiliary device for the ball mill and can also dry the wet fine concentrate powder after its magnetic separation.

The mineral powder ball press machine is a dedicated drying device developed for the powder materials, which can effectively reduce the humidity of the materials and remove oil pollution. The wet materials once entering into the dryer are turned over by the shoveling plate evenly placed inside the drum, and then scatter evenly in the drying cylinder fully meeting the hot air to speed up the drying process.